The purpose of an extender is to stretch the penis most comfortably. The mechanism only works when the head is securely fastened. The time to wear the device depends on how safe and convenient the installation is, and how quickly it progresses. Vacuum extenders are considered the best option, along with their improved version - vacuum adhesives. These devices appeared on the market about 10 years ago and have largely replaced mechanical devices since then.
Design Features and How It Works
In a vacuum extender, the glans penis is not held in place with a ring or band, but is sucked into a special bowl (chamber, vacuum nozzle) by vacuum. The device works as a vacuum pump, but in this case, the effect is only on the head and the area adjacent to it. Air from the chamber, as in a pump, is drawn out by a pump or pear pump.
Key benefits of the vacuum fixed model:
- do not slip;
- Effectively correct the curvature of male organs;
- Do not pinch the head and foreskin;
- Suitable for small penis;
- comfortable to wear.
The main disadvantage of vacuum mount extenders is air bubbles in the head. This does not happen mechanically. The damage is caused by the delamination of the tissue under the influence of the vacuum. It is not possible to continue classes until the blisters have healed, and since they occur so often, the effectiveness of wearing the device decreases significantly.
Many manufacturers add protective caps to their products to protect the head. Some models come with patch rollers, which should be sealed before putting in the lid. The bonding and subsequent removal process can cause discomfort and pain.
Some men complain about the inconvenience of wearing the extender: the guard is not attached to the relaxed head, and the penis must be at least partially erect. When the extender is worn, the head shrinks, so a gap is created between it and the cap wall - again exposing the skin to the traumatic effects of the vacuum.
Scenario for placing the vacuum expander:
- Seal head and wear protective cap.
- Unfold the part of the silicone sleeve attached to the top of the camera onto the body.
- Place the penis in the chamber and roll the silicone sleeve around the shaft to the end.
- Blow out excess air with a blower or pump.
- Fix the penis on the extension rod and adjust the length.
Part of the penis is tightly compressed by the silicone, which causes discomfort and disrupts blood flow. The enclosed area of the trunk barely extends. If the penis is about 12 cm, then most of it will be under the silicone curl.
In premium models with vacuum-adhered attachments, only the head is drawn into the chamber, and the sleeve is replaced by a soft membrane. The penis and membranes are pre-lubricated with a special lubricant, then the head is brought to the opening of the chamber and sucked into it by several movements of a rubber ball. It is then disconnected and the device is firmly attached to the head. To remove it, just turn the valve on top of the chamber. The lubricant adheres the head to the membrane, preventing the formation of gaps, thereby eliminating the appearance of air bubbles.
how to use
Before installing the vacuum extender for the first time, set the starting length - the size of your erect penis. In the future, the compression force is regulated by a spring on the rod (on spring-loaded models): if the scale is fully visible (the groove is not closed), there is no tension. If there is no noticeable tension when the rod is fully unscrewed, use the rod included in the kit to add extra length. The traction force of a stretcher (belt system) can be determined using a household spring balance.
It is not possible to set a great degree of tension at once: the tunica albuginea covering the corpus cavernosum may be compacted, worsening the erection, edema of the head, lack of growth, and even a reduction in the length of the penis. Within a month, give a light adaptive load. The extender can be worn for no more than 1-2 hours, the pulling force is 200-400 grams, and the maximum is 500 grams. When the penis tissue gets used to stretching, you should switch to a more severe mode: 6-8 hours a day (not necessarily continuous) with a load of 1. 1 kg. The extender should only be worn at maximum length (power traction) after 4 weeks.
Power Growth Plan:
- Twist the extender to the length of the erect penis, with a pulling force of 300-600 grams;
- When put on, the load can be increased by up to 1kg;
- Wear 2 hours a day without interruption or spend 2 times 1. 5 hours. One day off per week.
It is important to measure the length of the penis (stretched, unerect) after each exercise. The increase indicates the validity of the selected program. If the penis gets smaller, you need to rest for 2-3 days.
In one year, with the help of a vacuum extender, the length of the penis can be increased by 3-4 cm and the circumference can be increased by 1 cm. Organizational elasticity. The results also depended heavily on the density of the protein coat.
Contraindications
Before buying a vacuum extender, you should consult your doctor - he will help determine contraindications to wearing it. Mainly include the following:
- Violation of blood coagulation, fragile blood vessels. A vacuum can cause a hematoma to appear.
- Prostate adenoma, prostatitis.
- Scrotal hernia.
- sexual infection.
Using a vacuum extender while under the influence of pain relievers, drugs, or alcohol is dangerous. It is not advisable to wear the device at night - in a dream, it is easy to miss the moment when the tissue is deprived of oxygen due to excessive squeezing, and spontaneous erection at night is also dangerous.
Overview of popular models
Most urologist-andrologists recommend to their patients a vacuum system secured with a vacuum adhesive for penis enlargement. The soft membrane protects the head from damage by preventing direct exposure to vacuum. Vacuum bonded models are also considered comfortable and efficient. The kit includes a camera, pears, poles, a set of membranes of various sizes, extension poles, gel. There are detailed instructions on how to properly fit and wear the device. The maximum extender length is 32 cm.
There is a kit to upgrade the strap and loop extender. However, it costs so much that it's easier to buy a vacuum extender.
The Korean extender is positioned by the manufacturer as the most comfortable to wear with additional head magnification. Fixed by vacuum bonding. The kit includes 3 membranes, 8 screw-in extension pins.
Instructions:
- A membrane of suitable diameter is stretched on the rim of the chamber, lubricated with lubricant (together with the glans penis);
- The camera is placed on the pole;
- The shaft of the penis is placed in the extender, and the head is screwed into the chamber;
- Pears draw air.
The device from a Swiss company is a vacuum expander designed for long-term wear. According to men, it is considered the most comfortable. The kit includes 3 vacuum chambers with condoms attached, 4 cuffs, 2 protective caps, a pump. This model includes a harness attachment system (stretcher) that allows the use of extenders in public areas.
Instructions for use:
- Wearing a protective cap on the head.
- The penis is passed between the extension rods and the rods are wrapped until the optimum level of tension is achieved.
- With the head placed in an appropriately sized chamber (a template for sizing is attached), the condom is rolled over part of the torso.
- A pump in the form of an accordion is attached to the chamber, with the help of which the air is drawn out.
If necessary, remove the rod and pull the member with the camera on the head onto the strap.
Some people make their own extenders using bicycle pump housings, plastic, silicone, and pipe fittings. It is very difficult to make a really functional and safe device with your own hands. In terms of quality, such crafts are usually inferior to cheap Chinese extenders.
Comment
Male, 44: "I've been using the equipment with a stretcher for half a year. The length has increased by 2cm - a remarkable result. I supplement the traction with jelq and lifting weights, but very little.
Male, 25: "I ordered a Chinese device and I'm considering a return or exchange for a Korean device before it's too late. It's uncomfortable to wear, the penis is squeezed to the point of colic, nothing in this caseDoubt has no effect.
in conclusion
Vacuum extenders made in Switzerland, South Korea and Germany are officially recognized as an effective means of penis enlargement. Equipped with detailed video instructions to prevent misuse. It is important to consider that the regularity of wearing the extender is as important as the quality.